Hamer Brand Model 7800 Net Weigh Scale


The Model 7800 is an electronic simplex scale system that maximizes its performance with free flowing, dense product types. The unit comes with a 2.1 CF air operated double-door weigh hopper suspended from dual strain gauge weigh sensor modules mounted in a dust-tight, air purged compartment. Operated by a programmable logic control (PLC) system that operates a two-stage feeder system, gravity bulk and gravity dribble for the -GG version and gravity bulk and vibratory dribble for the -GV version. The operator inputs the desired product weights for each production run and monitors the system for ongoing weight accuracy. Based on flow characteristics of the product(s), the 7800 simplex scale will process up to 20 bags per minute. Fills flat and gusseted multi-wall paper, polyester and woven polypropylene bags ranging from 10 to 24 inches in width. Air consumption is 3.5 SCFM @ 60PSI constant. Fischbein may require product samples and bags for testing purposes.

Are you interested in this product?
We are here to help.

Contact Us

Features

  • Gravity-gravity and gravity-vibratory versions available
  • Weigh hopper features smooth steep vertical wall design
  • PLC controls housed in free standing fiberglass enclosure
  • Digital controller display in pounds or kilos
  • NEMA 12 electrical specifications
  • Electrical specifications 115V/1/60
  • Weigh up and dump operation
  • Scale mounted discharge hopper
  • 316L stainless steel contact parts
  • 316L stainless steel round discharge spout 7-7/8” OD
  • 316L stainless steel square to round transition
  • 304 stainless steel load cell covers
  • CR Plus – 2 part corrosion resistant powder coat finish
  • Sealtite & fittings, stainless steel air cylinders and fasteners

Standard Specs

Speed

Gravity: 

  • Up to 20 BPM 

Vibratory

  • Up to 20 BPM

Accuracy

+/- 2-4 ounces

Weight Range

25-110 lbs

Bag Types

  • Width: 10″ to 24″ for Gravity and Vibratory
  • Flat and gusseted multi-wall paper, polyester, and woven polypropylene

Electrical Requirements

Gravity or Vibratory:

  • 115VAC, 1 PH, 60 Hz

Air Requirements

Gravity or Vibratory:

  • 3.5 CFM @ 60 PSI constant

Accessories

OPTIONS:

  • Stainless steel contact parts in 316SS
  • Round discharge spout in mild steel
  • Round discharge spout in stainless steel
  • Oval discharge spout with 360 degree bag clamp
  • Oval to round bag clamp in mild steel
  • Oval to round bag clamp in stainless steel
  • Transition round to square in stainless steel
  • Foot pedal operation
  • Antenna switch operation
  • Air vibrator for dust hopper
  • Oversize weigh hopper greater than 2.5 CF up to 5.0 CF
  • Zinc Plus – 2 part corrosion resistant powder coat finish

Document / Resources